Falns 85 m³

4-axle hopper wagon

Falns 85 m³ 3D
Falns 85 m³ 3D

Features

  • This self discharging open hopper wagon is suitable for the transportation of weather resistant
    materials mainly coal, coke talc, limestone, gravel and sand.
  • Side unloading is achieved by the pneumatically operated four doors at once or two and two opposite doors separately. Pressure air is supplied from separate 10 bar air pipeline with isolation possibility. There is a manual emergency system for unloading without pressure air.
  • This wagon is designed according to TSI, EN, UIC for RIV and TEN RIV traffic operation.

Capabilities

  • Two possibilities to unload and load. The transport of a whole load or in stages. The wagon has a short time resistance up to +80 ºC in heating ovens.
  • The command of wagon discharging is possible from both sides of wagon. Air reservoirs enable minimum once open/close operations of doors for stand alone wagon.
  • Tightness of doors for a grain >1 mm.

Note: The descriptions provided herein are for general information purposes only.

Axle load22.5 t / axle
Track gauge1,435 mm
Loading gaugeG1-TSI
Brake regime”S”
Brake typeGP-A-K
Max. speed at 90 t100 km/h
Max. speed (unloaded)120 km/h
Climate conditionTRIV
Rmin (single wagon)75 m
Length over buffers13,500 mm
Tare weight~ 25.6 t
Payload~ 64.4 t
Loading opening12,660 x 1,950 mm
Unloading length4 x 5,430 mm
Slope sheet angle49°
Number of sections2
Material of boxCarbon steel
Material of slope edgesStainless
Bogie typeY25Lsd1-K
Doors operationPneumatic
Air pressureFrom 5 to 10 bar
Drawing