Zacens 73 m³

4-axle tank wagon

Zacens 73 m³ 3D
Zacens 73 m³ 3D

Features

  • The tank car is designed for the transportation of liquid chemical products compliant with the tank code L4BH.
  • The heating system consists of two separate half pipe channel circuits located under the tank. The tank is insulated with thermal insulation of 100mm thickness, which is covered with stainless steel plates.
  • The wagon design meets the requirements of RID, TSI, EN, UIC standards and has TEN GE marking for traffic operation.

Capabilities

  • The tank is loaded/filled according to the characteristics of the transported material, through the dome (fitted with flap cover secured with 4 screws) or through the DN 150 filling nozzle.
  • The tank is discharged through the lower side, through the discharge pipe DN 100 or, as an option, through the upper side of tank, by means of a deep pipe.
  • Bottom valve is operated through a mechanical bilateral operating device.

Note: The descriptions provided herein are for general information purposes only.

 

 

 

Axle load22.5 t / axle
Track gauge1,435 mm
Loading gaugeG1-TSI
Brake regime”S”
Brake typeKE-GP (K)
Max. speed for 90 t100 km/h
Max. speed (unloaded)120 km/h
Climate conditionT1
Rmin (single wagon)35 m
Length over buffers15,040 mm
Effective volume~ 72.2 m3
Tank central slope1.5°
Calculation pressure10 bar
Max. operating pressure3 bar
Tare weight~ 24.1 t (Ri25)
Payload~ 65.9 t
Bogie typeY25Lsd-KP1
Heating temperaturemax. 190° C
Material of equipmentCarbon steel
Drawing